The Ultimate Guide to Data Recovery from a Broken Hard Drive

A hard drive can fail for many different reasons. These can range from being accidentally deleted to being physically damaged beyond repair. Fortunately, data recovery from a failed hard drive is not as difficult as it may seem.
If you know what to do, it is actually quite simple. Follow this guide for tips on how to recover data from a failing hard drive.
What Causes Hard Drives to Fail?
There are many different things that can cause a hard drive to fail. Some of the most common reasons include:
- Being overwritten or deleted
- Physical damage
- Poor quality materials used in manufacturing -Incorrect power supply voltage Viruses and malware
How to Recover Data from a Broken Hard Drive
Since the hard drive is broken, we’re going to need to find a way to access the data. This can be done in two ways. The first way is by using a piece of software called Recuva.
The second way is for more advanced users and involves opening up the hard drive to retrieve the data oneself. To use Recuva, download it from their website and install it on your computer.
This will allow you to scan your computer and find the files that still exist on your hard drive. By following these steps, you should be able to recover some or all of your data from the broken hard drive.
Back-Up the Hard Drive
The first step you should take when attempting to recover data from a broken hard drive is to back it up. Data recovery software programs are not perfect and regardless of what you do, the best-case scenario is that some of your data will be lost.
To make sure that you don’t lose everything, having a backup hard drive on hand will be useful. It doesn’t have to be anything fancy, but if it can hold all of the data from your broken drive, then it’s an essential part of recovering data from a failing hard drive.
Is your Hard Drive Failing?
If you are experiencing any of the following, it is likely time to back up your data and replace your hard drive. -Your hard drive is making a grinding noise or clicking sound -You have tried accessing your files but they are not there -The computer is freezing or shutting down unexpectedly -It takes much longer than usual to start up the laptop -You can hear the hard drive spinning while working on the laptop
Soft Reset the Hard Drive
A soft reset will often fix a disk read/write issue. If your hard drive is not powering on, that means it’s possible for the disk to have been unplugged and the power could be restored by plugging it back in.
To do this, unplug the power cord from the back of your computer and wait at least 5 minutes before plugging it back in. This will ensure that all of the power is drained from the system. Then, plug your power cord back in and turn your computer on.
If you’re still experiencing issues with your hard drive after following these steps, you may need to use a hardware-specific tool to try to repair any possible damage. This can be done by using a recovery disc or software like Norton Utilities or Data Rescue PC.
Check the Power Cable
If a hard drive is physically damaged, then the issue is not with the storage device itself. The problem will most likely be that the power cable is not plugged in. Make sure you check the power cable and make sure it is firmly plugged into your computer.